Specifications

Data Sheet
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 9
LEDs
●
CD (data carrier detect): Indicates a received error on the telco link
●
LP (loopback): Indicates that the interface is in loopback mode
●
AL (alarm): Indicates an alarm condition
Table 7. Network Management Features
Management Feature
Telnet or Console Remote and local configuration, monitoring, and troubleshooting from Cisco IOS Software CLI
Simple Network Management
Protocol (SNMP)
●
Router and DSU/CSU managed by single SNMP agent; router, DSU, and CSU appear as a single network
entity to user
●
Standard MIB (MIB II)
●
Cisco Integrated DSU/CSU MIB
●
RFC 1406 T1 MIB, Including Alarm Detection and Reporting
SNMP Traps Generated in response to alarms
Environmental
●
Operating temperature: 0 to 40ºC (32 to 104°F)
●
Storage temperature: –25 to +70ºC (–13 to 158°F)
●
Relative humidity: 5 to 85% noncondensing operating; 5 to 95% noncondensing, nonoperating
Regulatory Compliance
Table 7 gives regulatory compliance information for the Cisco MFT VWIC3 cards.
Table 8. Regulatory Compliance for Cisco MFT VWIC3 Cards
Safety EMC Immunity EMC Emissions Network Equipment Building Standards (NEBS)
●
UL 60950
●
CAN/CSA C22.2 No. 60950
●
IEC 60950-1
●
EN 60950-1
●
AS/NZS 60950
●
EN55024 (CISPR24)
●
EN61000-4-2
●
EN61000-4-3
●
EN41000-4-4
●
EN41000-4-5
●
EN41000-4-6
●
EN41000-4-8
●
EN41000-4-11
●
EN50082-1
●
EN61000-6-2
●
ITU-T K.21
●
CFR 47 Part 15, Class A
●
ICES-003 Class A
●
EN55022 Class A
●
CISPR22 Class A
●
AS/NZS 3548 Class A
●
VCCI Class A
●
EN 300386
●
EN61000-3-2
●
EN61000-3-3
●
GR-63
●
GR-1089 Type 1, 3
Telecom Homologation
Homologation requirements vary by country and interface type. For specific country information, refer to the online
approvals data base at
http://tools.cisco.com/cse/prdapp/jsp/externalsearch.do?action=externalsearch&page=EXTERNAL_SEARCH&modul
e=EXTERNAL_SEARCH.
T1 Compliance (partial list)
●
TIA-968-A
●
CS-03
●
Jate
●
ANSI T1.403