Datasheet

file:///C|/paws/65322/tdmfxwic.html
Configurations
This document uses the configurations shown below.
● This example shows a T1 controller configured for data and drop-and-insert capability
Router# show run
Building configuration...
version 12.4
card type t1 0 0
!
no network-clock-participate wic 0
ip subnet-zero
ip cef
!
no ip dhcp use vrf connected
!
controller t1 0/0
framing esf
linecode b8zs
channel-group 1 timeslots 1-12 speed 64
tdm-group 2 timeslots 13-24
!
controller t1 0/1
framing esf
linecode b8zs
channel-group 1 timeslots 1-12 speed 64
tdm-group 2 timeslots 13-24
!
!
interface Serial0/0:1
ip address 10.0.0.1 255.255.255.0
!
interface Serial0/1:1
ip address 10.0.0.2 255.255.255.0
!
connect t1-xconnect T1 0/0 2 T1 0/1 2
!
!
● This example shows a Cisco 2620XM T1 controller with a 2-port VWIC2-2MFT-T1 installed.
Router# show run
file:///C|/paws/65322/tdmfxwic.html (5 of 8)1/9/2006 4:31:12 AM