Installation guide
Table Of Contents
- Contents
- Features Introduced in Previous Releases of VISM Software
- Elements of Release 3.1(1)
- Installation and Upgrade Procedures
- VISM Firmware and Boot Code Download Procedure for PXM1
- VISM Firmware and Boot Code Download Procedure for PXM1E and PXM45
- VISM/VISM-PR Firmware Upgrade
- VISM to VISM-PR Hardware Upgrade
- Installing VISM Software Updates with PXM1 Cards
- Installing VISM Software Updates with PXM1E or PXM45 Cards
- VISM Boot Code Upgrade Procedure with PXM1 Cards
- VISM Boot Code Upgrade Procedure with PXM1E and PXM45 Cards
- VISM Downgrade Procedure
- Caveats
- Related Documentation
- Obtaining Documentation
- Obtaining Technical Assistance
- Obtaining Additional Publications and Information
7
Release Notes for Cisco Voice Interworking Service Module Release 3.1(1)
OL-3480-01 Rev. C0, January 2003
Elements of Release 3.1(1)
VISM software interoperability with other Cisco products is described in Table 3.
Table 4 describes the software images available for Release 3.1(1) for VISM/VISM-PR.
Table 5 describes the software boot code and run-time firmware requirements for software Release
3.1(1) for VISM/VISM-PR.
Note Loading this release of the backup bootcode is required for existing VISM cards not using this new
release.
Limitations and Restrictions
The following limitations and restrictions are valid for software Release 3.1(1) for VISM/VISM-PR:
• Software Release 3.1(1) for VISM/VISM-PR requires you to use 64 Mb VISM cards or VISM-PR
cards exclusively.
• The switched AAL2 PVC operating mode is not supported in software Release 3.1(1) for
VISM/VISM-PR.
Table 3 Software Release 3.1(1) for VISM/VISM-PR Interoperability with Other Cisco Products
Cisco 3810 12.2(8)T1
AS5400 122-10.7
Virtual Switch Controller Software VSC 9.1.5
Table 4 Software Images for Release 3.1(1) for VISM/VISM-PR
Product Name Software Image Firmware Description
MGX-VISM-SW3100 003.001.000.000 vism_8t1e1_003.001.000.000.fw This image does not support the
CALEA
1
feature.
1. CALEA = Commission on Accreditation for Law Enforcement Agencies.
MGX-VISM-LISW3100 003.051.000.000 vism_8t1e1_003.051.000.000.fw
2
2. The CALEA implementation supports the CALEA law intercept confirmation interface.S
Use this image for CALEA
1
feature
support.
Table 5 Software Release 3.1(1) for VISM/VISM-PR Software Boot and Run-time Firmware
Requirements
Board Pair Latest Boot Code Version Minimum Boot Code Version
MGX-VISM-8T1 vism_8t1e1_VI8_BT_3.1.01.fw vism_8t1e1_VI8_BT_3.1.00.fw
MGX-VISM-8E1 vism_8t1e1_VI8_BT_3.1.01.fw vism_8t1e1_VI8_BT_3.1.00.fw
MGX-VISM-PR-8T1 vism_8t1e1_VI8_BT_3.1.01.fw vism_8t1e1_VI8_BT_3.1.00.fw
MGX-VISM-PR-8E1 vism_8t1e1_VI8_BT_3.1.01.fw vism_8t1e1_VI8_BT_3.1.00.fw