Installation guide
Table Of Contents
- Contents
- Features Introduced in Previous Releases of VISM Software
- Elements of Release 3.1(1)
- Installation and Upgrade Procedures
- VISM Firmware and Boot Code Download Procedure for PXM1
- VISM Firmware and Boot Code Download Procedure for PXM1E and PXM45
- VISM/VISM-PR Firmware Upgrade
- VISM to VISM-PR Hardware Upgrade
- Installing VISM Software Updates with PXM1 Cards
- Installing VISM Software Updates with PXM1E or PXM45 Cards
- VISM Boot Code Upgrade Procedure with PXM1 Cards
- VISM Boot Code Upgrade Procedure with PXM1E and PXM45 Cards
- VISM Downgrade Procedure
- Caveats
- Related Documentation
- Obtaining Documentation
- Obtaining Technical Assistance
- Obtaining Additional Publications and Information
6
Release Notes for Cisco Voice Interworking Service Module Release 3.1(1)
OL-3480-01 Rev. C0, January 2003
Elements of Release 3.1(1)
MGX 1 MGX 1 1.2.11 1.1.42
MGX 2 MGX 2 3.0.10 2.1.80
MGX-AUSM-8E1/B AUSMB-8E1 10.2.00 10.0.23
MGX-AUSM-8T1/B AUSMB-8T1 10.2.00 10.0.23
MGX-CESM-8T1/B CESM-8T1/B 10.2.00 —
MGX-CESM-E3 CESM-E3 10.2.00 10.0.22
MGX-CESM-T3 CESM-T3 10.2.00 10.0.22
MGX-FRSM-2CT3 FRSM-2CT3 10.2.00 10.0.23
MGX-FRSM-2T3E3 FRSM-2T3 10.2.00 10.0.23
MGX-FRSM-2T3E3 FRSM-2E3 10.2.00 10.0.23
MGX-FRSM-HS1/B FRSM-HS1/B 10.2.00 10.0.23
MGX-FRSM-HS2 FRSM-HS2 10.2.00 10.0.23
MGX-FRSM-HS2/B FRSM-HS2/B 20.0.1.0 —
MGX-RPM-XF-512 MGX-RPM-XF-512 12.2(11)YP 12.2(8)YP
MGX-SRM-3T3/B SRM-3T3 — —
MGX-SRM-E SRM-E — —
MGX-VISM-8E1 VISM-8E1 3.1(1) 1.5
MGX-VISM-8T1 VISM-8T1 3.1(1) 1.5
MGX-VISM-PR-8E1 VISM-PR-8E1 3.1(1) 3.1(0)
MGX-VISM-PR-8T1 VISM-PR-8T1 3.1(1) 3.1(0)
PXM1
2
PXM-1 1.2.10 1.1.40 and 1.2.0
PXM1-1-622
1
PXM1-OC12 1.2.10 1.1.40 and 1.2.0
PXM1-2-T3E3
1
PXM1-2T3E3 1.2.10 1.1.40 and 1.2.0
PXM1-4-155
1
PXM1-4OC3 1.2.10 1.1.40 and 1.2.0
PXM1E PXM1E 3.0.10 3.0.10
PXM45 PXM45 3.0.10 3.0.10
RPM RPM 12.2(8)T4 12.2(8)T4
RPM IOS RPM IOS 12.2(8)T4 —
RPM/B RPM/B 12.2(8)T4 12.2(8)T4
RPM-PR RPM-PR 12.2(11)T1 12.2(8)T4
MGX-RPM-XF RPM-XF 12.2(11)YP 12.2(11)YP
MGX-RPM-PR-256/512 RPM-PF 12.2(11)T1 12.2(11)T1
SES SES 3.0.10 1.0.14
1. CWM Release 10.5 does not support all of the new MIBs listed in the “VISM Management Information Base”
section on page 2.
2. This card is available for VISM cards only.
Table 2 VISM Software Interoperability (continued)
Product CW2000 Name Latest Firmware Min. Firmware