Installation guide

5
Release Notes for Cisco Voice Interworking Service Module Release 3.1(1)
OL-3480-01 Rev. C0, January 2003
Elements of Release 3.1(1)
Note You can use a VISM-PR card as a redundant card for a VISM card, but a VISM card cannot be used
as a redundant card for a VISM-PR card.
There is support for Bulk Distribution using the SRM-3T3 and SRM-E (OC3) cards.
VISM Call Rate
Software Release 3.1(1) for VISM/VISM-PR handles at least 10 CAS, SS7, or PRI calls per second per
VISM card.
Compatibility
VISM software interoperability with MGX 8830, MGX 8850(PXM1E), MGX 8850(PXM1), MGX
8850(PXM45), MGX 8250, and MGX 8230 platform software is listed in Table 2.
Table 2 VISM Software Interoperability
Product CW2000 Name Latest Firmware Min. Firmware
AUSM-8E1/B AUSM-8E1/B
20.0.2.0 20.0.2.0
AUSM-8T1/B AUSM-8T1/B
20.0.2.0 20.0.2.0
AX-CESM-8E1 CESM-8E1 10.2.00 10.0.22
AX-CESM-8T1 CESM-8T1 10.2.00 10.0.22
AX-FRSM-8E1/E1-C FRSM-8E1 20.0.1.0 10.0.23
AX-FRSM-8T1/T1-C FRSM-8T1 20.0.1.0 10.0.23
AXSM-1-2488 AXSM-1-2488
3.0.10 3.0.10
AXSM-1-2488/B AXSM-1-2488/B
3.0.10 3.0.10
AXSM-16-155 AXSM-16-155
3.0.10 3.0.10
AXSM-16-155/B AXSM-16-155/B 3.0.10 3.0.10
AXSM-16-T3/E3 AXSM-16-T3/E3 3.0.10 3.0.10
AXSM-16-T3/E3/B AXSM-16-T3/E3/B 3.0.10 3.0.10
AXSM-16-T3E3-E AXSM-16-T3E3-E 3.0.10 3.0.10
AXSM-2-622-E AXSM-2-622-E 3.0.10 3.0.10
AXSM-32-T1E1-E AXSM-32-T1E1-E 3.0.0 3.0.0
AXSM-4-622 AXSM-4-622 3.0.10 3.0.10
AXSM-4-622/B AXSM-4-622/B 3.0.10 3.0.10
AXSM-8-155-E AXSM-8-155-E 3.0.10 3.0.10
BPX/IGX BPX/IGX 9.3.42 9.2.42
CESM-8E1 CESM-8E1
20.0.2.0 20.0.2.0
CESM-8T1/B CESM-8T1/B
20.0.2.0 20.0.2.0
CWM — 11.0.10 10.5.10
1
patch 1
FRSM-12-T3E3 FRSM-12-T3E3 3.0.10 3.0.10