Installation guide

3
Release Notes for Cisco Voice Interworking Service Module Release 3.1(1)
OL-3480-01 Rev. C0, January 2003
Elements of Release 3.1(1)
dsplinesabyte
Use the dsplinesabyte to display the transmit and receive SA buffers.
Syntax
dsplinesabyte <line_number>
Syntax Description
Example
cvgmgx1a.1.20.VISM8.a > dsplinesabyte 1
Line 1 Transmit SA Buffer Registers
------- -------
Transmit Sa4-byte Buffer: 255
Transmit Sa5-byte Buffer: 255
Transmit Sa6-byte Buffer: 255
Transmit Sa7-byte Buffer: 255
Transmit Sa8-byte Buffer: 255
Line 1 Receive SA Buffer Registers
------- -------
Receive Sa4-byte Buffer: 0
Receive Sa5-byte Buffer: 0
Receive Sa6-byte Buffer: 0
Receive Sa7-byte Buffer: 0
Receive Sa8-byte Buffer: 0
Possible errors include
• Incorrect number of parameters.
• Line number is out-of-range.
cnflinesabyte
Use the cnflinesabyte command to configure SA bytes on a line.
Syntax
cnflinesabyte <line_number> <sa_byte> <sa_value>
Parameter Description
line_number Line number in the range 1–8.