Specifications

IP Switching Commands
clear ip mds linecard
ISW-28
Cisco IOS IP Switching Command Reference
May 2008
clear ip mds linecard
To reset multicast distributed switching (MDS) line card information on the router, use the clear ip mds
linecard command in privileged EXEC mode.
clear ip mds linecard {linecard-slot-number | *}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines When the * keyword is specified instead of the linecard-slot-number argument, all MDS information on
all line cards is cleared and reset.
Examples The following example clears and resets all MDS line card information on the router:
Router# clear ip mds linecard *
Related Commands
linecard-slot-number Slot number containing the line card to be reset.
* Indicates that the reset should be executed on all line cards.
Release Modification
12.0(19.3)S This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Command Description
show ip mds Clears MDS information from the router.
show ip mds interface Displays the MFIB table and forwarding information for MDS on a
line card.
show ip mds stats Display switching statistics or line card statistics for MDS.
show ip mds summary Displays a summary of the MFIB table for MDS.
show ip mds forwarding Displays MDS information for all the interfaces on the line card.