Specifications

IP Switching Commands
snmp-server host
ISW-341
Cisco IOS IP Switching Command Reference
May 2008
community-string Password-like community string is sent with the notification operation.
Note You can set this string using the snmp-server host command by
itself, but Cisco recommends that you define the string using the
snmp-server community command prior to using the snmp-server
host command.
Note The “at” sign (@) is used for delimiting the context information.
udp-port (Optional) Specifies that SNMP traps or informs are to be sent to an NMS
host.
port (Optional) UDP port number of the NMS host. The default is 162.
notification-type (Optional) Type of notification to be sent to the host. If no type is specified,
all available notifications are sent. The notification type can be one or more
of the following keywords:
• bgp—Sends Border Gateway Protocol (BGP) state change notifications.
• calltracker—Sends Call Tracker call-start/call-end notifications.
• cef — Sends notifications related to Cisco Express Forwarding.
• config—Sends configuration change notifications.
• cpu—Sends CPU-related notifications.
• director—Sends notifications related to DistributedDirector.
• dspu—Sends downstream physical unit (DSPU) notifications.
• eigrp—Sends Enhanced Interior Gateway Routing Protocol (EIGRP)
stuck-in-active (SIA) and neighbor authentication failure notifications.
• entity—Sends Entity MIB modification notifications.
• envmon—Sends Cisco enterprise-specific environmental monitor
notifications when an environmental threshold is exceeded.
• flash—Sends flash media insertion and removal notifications.
• frame-relay—Sends Frame Relay notifications.
• hsrp—Sends Hot Standby Routing Protocol (HSRP) notifications.
• iplocalpool—Sends IP local pool notifications.
• ipmobile—Sends Mobile IP notifications.
• ipsec—Sends IP Security (IPsec) notifications.
• isdn—Sends ISDN notifications.
• l2tun-pseudowire-status—Sends pseudowire state change
notifications.
• l2tun-session—Sends Layer 2 tunneling session notifications.
• llc2—Sends Logical Link Control, type 2 (LLC2) notifications.
• memory—Sends memory pool and memory buffer pool notifications.
• mpls-ldp—Sends Multiprotocol Label Switching (MPLS) Label
Distribution Protocol (LDP) notifications indicating status changes in
LDP sessions.