Specifications

IP Switching Commands
show xdr
ISW-330
Cisco IOS IP Switching Command Reference
May 2008
show xdr
To display details about eXternal Data Representation (XDR), use the show xdr command in user EXEC
or privileged EXEC mode.
show xdr {client {client-name | all} [statistics] | linecard [linecard-number] [internal] |
multicast-group | timers}
Syntax Description
Defaults This command has no default settings.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command is available only on distributed platforms (such as the Cisco 7500 series) and on the
Cisco
10000 series routers.
Examples The following example shows how to display XDR information for all clients:
Router# show xdr client all
XDR Interrupt P(0) flag:1 decode:0x413B9804 pull:0x413B9AE8 context:8
XDR Process Pri(1) flag:1 decode:0x413B99A0 pull:0x413B9D3C context:6
FIBHWIDB broker(2) flag:1 decode:0x0 pull:0x413A7B7C context:2
FIBIDB broker (3) flag:1 decode:0x0 pull:0x413A844C context:2
client {client-name | all} Displays client basic information or statistics for a client or all clients.
statistics (Optional) Displays XDR statistics.
linecard (Line cards only) (Route/Switch Processor (RSP) on Cisco 7500 series and
Route Processor (RP) on Cisco 10000 series) Displays XDR information
for all XDR line card peer instances or the specified XDR line card peer
instance.
linecard-number (Optional) Specifies the line card slot number.
internal (Optional) (RSP only) Displays internal information.
multicast-group Displays XDR multicast groups.
timers Displays XDR timers.
Release Modification
12.2(25)S This command was introduced.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
implemented on the Cisco 10000 series routers.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.