Specifications

IP Switching Commands
show pxf statistics
ISW-322
Cisco IOS IP Switching Command Reference
May 2008
show pxf statistics
To display summary Parallel eXpress Forwarding (PXF) statistics, use the show pxf statistics command
in privileged EXEC mode.
show pxf statistics {context | diversion | drop [detail] | ip | ipv6}
Syntax Description
Command Modes Privileged EXEC
Command History
Examples The following example shows a summary of PXF IP statistics:
Router# show pxf statistics ip
Chassis-wide PXF forwarding counts
IP inputs 0, forwarded 0, punted 0
IP dropped 0, no adjacency 0, no route 0
IP unicast RPF 0, unresolved 0
ICMP created 0, Unreachable sent 0, TTL expired sent 0
ICMP echo requests 0, replies sent 0
ICMP checksum errors 0
IP packets fragmented 0, total fragments 0, failed 0
IP don't-fragment 0, multicast don't-fragment 0
IP mcast total 0, switched 0, punted 0, failed 0
IP mcast drops 0, RPF 0, input ACL 0, output ACL + taildrops 0
Last clearing of PXF forwarding counters:never
The following example shows a summary of PXF statistics for dropped packets:
Router# show pxf statistics drop
PXF input drops:
Unassigned drops (pkts/bytes): 0/0
Last clearing of drop counters: never
context Displays context statistics.
diversion Displays traffic diverted from the PXF.
drop [detail] Displays packets dropped by the PXF. The detail option provides detailed
information.
ip Displays IP and ICMP statistics.
ipv6 Displays IPv6 statistics.
Release Modification
12.0(22)S This command was introduced on the Cisco 10000 series router.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.3(7)XI1 This command was integrated into Cisco IOS Release 12.3(7)XI1.
12.2(31)SB This command was integrated into Cisco IOS Release 12.2(31)SB.