Specifications

IP Switching Commands
show pxf interface
ISW-317
Cisco IOS IP Switching Command Reference
May 2008
show pxf interface
To display a summary of the interfaces on the router and the Parallel eXpress Forwarding (PXF) features
and capabilities enabled on these interfaces, use the show pxf interface command in privileged EXEC
mode.
show pxf interface interface-name [detail]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines If you do not specify an interface, the command displays a summary of the statistics for all PXF
interfaces on the router.
Examples The following example shows PXF statistics for serial interface 1/0/0:
Router# show pxf interface s1/0/0
ed10#sho pxf interface s1/0/0
Serial1/0/0 is up, enabled, PXF enabled, IOS encap PPP (16)
Last clearing of Serial1/0/0 counters: 00:06:29
91 packets input, (1934 bytes)
Total PXF input errors (pkts/bytes): 0/0
PXF output queues:
Class ID Length/Max Outputs (pkts/bytes) Drops
0 class-default 276 0/1024 0/0 0
15 - 275 0/32 91/1953 0
Slot 1/0: FBB Rx:0x00000000 OCQ debug:0x00001040, qN_entry_cnt[5:0]: 0
PXF DMA RE drops: 0/0, Null config drops: 0/0
Last clearing of slot 1/0 counters: 00:06:29
interface-name Name of the interface.
detail (Optional) Displays detailed information for all PXF interfaces on the router.
Release Modification
12.2S This command was introduced.
12.3(7)XI1 This command was integrated into Cisco IOS Release 12.3(7)XI1.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.