Specifications

IP Switching Commands
show pxf feature nat
ISW-316
Cisco IOS IP Switching Command Reference
May 2008
show pxf feature nat
To display Parallel eXpress Forwarding (PXF) routing tables for Network Address Translation (NAT),
use the show
pxf feature nat command in user EXEC or privileged EXEC mode.
show pxf feature nat [entry | stat | tcp]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the show pxf feature nat command:
Router# show pxf feature nat
--- 171.22.12.175 192.168.0.129 --- ---
--- 171.22.12.163 192.168.0.7 --- ---
--- 171.22.12.161 192.168.0.13 --- ---
--- 171.22.12.162 192.168.0.3 --- ---
--- 171.22.12.165 192.168.0.8 --- ---
--- 171.22.12.168 192.168.0.14 --- ---
--- 171.22.12.170 192.168.0.12 --- ---
--- 171.22.12.166 192.168.0.15 --- ---
--- 171.22.12.164 192.168.0.16 --- ---
Related Commands
entry Displays NAT information.
stat Displays NAT processing information.
tcp Displays NAT TCP logging information.
Release Modification
12.1(1)E This command was introduced.
12.1(5)T This command was integrated into Cisco IOS Release 12.1(5)T.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Command Description
show pxf feature cef Displays PXF routing feature tables for Cisco Express Forwarding.