Specifications

IP Switching Commands
show pxf crash
ISW-308
Cisco IOS IP Switching Command Reference
May 2008
show pxf crash
To display Parallel eXpress Forwarding (PXF) crash information, use the show pxf crash command in
privileged EXEC mode.
show pxf crash
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Examples The following example shows crash information as a result of a PXF direct memory access (DMA) error.
The PXF crash information is typically stored in bootflash.
Router# show pxf crash
Summary of bootflash:pxf_crashinfo_20060117-152035
Time of crash was 15:20:35 UTC Tue Jan 17 2006
PXF DMA Error - End of Descriptor Before Cmd Byte Length Exhausted
Current microcode:
file=system:pxf/c10k2-11-ucode.108.0.0.0,
version=108.0.0.0,
description=Nightly Build Software created Sat 19-Nov-05 00:12
Table 51 describes the significant fields shown in the display.
Release Modification
12.1(1)E This command was introduced on the Cisco 10000 series router.
12.1(5)T This command was integrated into Cisco IOS Release 12.1(5)T.
12.2(31)SB This command was integrated into Cisco IOS Release 12.2(31)SB.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Ta b l e 51 show pxf crash Field Descriptions
Field Description
Summary of bootflash: Displays the filename in bootflash where the PXF crash
information is stored. The filename format includes the date
and time of the PXF crash.
Time of crash Displays the date of the PXF crash.