Specifications

IP Switching Commands
show pxf cpu subblocks
ISW-305
Cisco IOS IP Switching Command Reference
May 2008
Enc Identifies the type of encapsulation used on the interface. The
most common encapsulation types are:
0 = None
1 = Ethernet ARPA
2 = Ethernet SAP
3 = 802.2 SNAP
5 = Serial, raw HDLC
8 = Serial, LAPB
9 = Serial, X.25
20 = Frame Relay
21 = SMDS
22 = MAC-level packets
27 = Logical Link Control (LLC) 2
28 = Serial, SDLC (primary)
30 = Async SLIP encapsulation
33 = ATM interface
35 = Frame Relay with IETF encapsulation
42 = Dialer encapsulation
46 = Loopback interface
51 = ISDN Q.921
59 = DOCSIS (previously known as MCNS)
61 = Transparent Mode
62 = TDM clear channel
64 = PPP over Frame Relay
65 = IEEE 802.1Q
67 = LAPB terminal adapter
68 = DOCSIS Cable Modem
VCCI-map Displays the memory address for the Virtually Cool Common
Index (VCCI) map table for this particular VCCI.
VCCI Identifies the VCCI, in hexadecimal, assigned to the interface
or subinterface.
VC Identifies the virtual circuit (VC).
Table 50 show pxf cpu subblocks Field Descriptions (continued)
Field Description