Specifications

IP Switching Commands

show pxf cpu statistics

ISW-298

Cisco IOS IP Switching Command Reference

May 2008

show pxf cpu statistics

To display Parallel eXpress Forwarding (PXF) CPU statistics, use the show pxf cpu statistics command

in privileged EXEC mode.

Syntax Description

Command Default No default behavior or values.

Command Modes Privileged EXEC

Command History

atom (Optional) Displays Any Transport over MPLS (AToM) statistics.

backwalk (Optional) Displays backwalk requests statistics.

clear (Optional) Clears PXF CPU statistics.

diversion (Optional) Displays packets that the PXF diverted to the Route Processor

(RP) for special handling.

drop [interface] [vcci] (Optional) Displays packets dropped by the PXF for a particular interface or

Virtual Circuit Connection Identifier (VCCI).

ip (Optional) Displays IP statistics.

ipv6 (Optional) Displays IPv6 statistics.

l2tp (Optional) Displays packet statistics for an L2TP Access Concentrator (LAC)

(Optional) and L2TP Network Server (LNS).

mlp (Optional) Displays multilink PPP (MLP) statistics.

qos [interface] (Optional) Displays match statistics for a service policy on an interface.

queue (Optional) Displays queueing counters for all interfaces.

rx [vcci] (Optional) Displays receive statistics for a VCCI.

security (Optional) Displays ACL matching statistics.

Release Modification

12.3(7)XI1 This command was integrated into Cisco IOS Release 12.3(7)XI1.

12.2(28)SB This command was introduced on the Cisco 10000 series router and

integrated into Cisco IOS Release 12.2(28)SB.

12.2(31)SB This command was integrated into Cisco IOS Release 12.2(31)SB.