Specifications

IP Switching Commands
show pxf cpu qos
ISW-292
Cisco IOS IP Switching Command Reference
May 2008
show pxf cpu qos
To display Parallel eXpress Forwarding (PXF) External Column Memory (XCM) contents related to a
particular policy, use the show pxf cpu qos command in privileged EXEC mode.
show pxf cpu qos [policy-map policy-name | vcci]
Cisco 10000 Series Router
show pxf cpu qos [0–65535 | classifiers | flex-sum | policy-map policy-name | vcci-maps]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines This command is useful in verifying the presence of a policy on interfaces and indexes programmed in
the PXF.
Examples The following example shows XCM contents related to a policy called police_test, which is defined as
follows:
policy-map police_test
class high-priority
priority
class low-priority
set atm-clp
class class-default
0–65535 (Optional) Displays information for the Virtual Channel Circuit Identifier
(VCCI) you specify.
classifiers (Optional) Displays information about the criteria used to classify traffic.
flex-sum (Optional) Displays summary information describing the amount of memory
allocated in the PXF engine for use by the flexible key construction
microcode.
Note This option is only available on the Cisco 10000 series router for the
PRE3.
policy-map
policy-name
(Optional) Displays per-policy map information.
vcci (Optional) Displays VCCI map values.
Release Modification
12.2S This command was introduced.
12.3(7)XI1 This command was introduced on the Cisco 10000 series router for the
PRE2.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(31)SB2 This command was introduced on the PRE3 for the Cisco 10000 series
router.