Specifications

IP Switching Commands
show pxf cpu feedback
ISW-277
Cisco IOS IP Switching Command Reference
May 2008
show pxf cpu feedback
To display the total number of feedbacks through the Parallel eXpress Forwarding (PXF) by all packets,
use the show pxf cpu feedback command in privileged EXEC mode.
show pxf cpu feedback
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Examples The following example shows feedback counters information:
Router# show pxf cpu feedback
Load for five secs: 5%/0%; one minute: 6%; five minutes: 2%
Time source is hardware calendar, *21:13:02.615 UTC Tue Nov 29 2005
FP column 0 feedback counts
Global packet handle retry counter = 0
Name Current Difference (since last show)
--------------------- ---------- ----------
bypass = 0 0
schedule retry = 0 0
WRED sample = 0 0
MLPPP linkq update = 0 0
IP frag = 0 0
ICMP = 0 0
layer2 divert = 0 0
tunnel lookup = 0 0
tunnel RX = 0 0
tunnel TX = 0 0
output qos = 0 0
tag not ip = 0 0
netflow accumulate = 0 0
netflow age = 0 0
netflow swap = 0 0
netflow export = 0 0
PBR = 0 0
input secACL log = 0 0
input secACL split = 0 0
output secACL log = 0 0
output secACL split = 0 0
IPC response = 0 0
IPC MLPPP flush = 0 0
input qos split = 0 0
Release Modification
12.2S This command was introduced on the Cisco 10000 series router.
12.2(31)SB This command was integrated into Cisco IOS Release 12.2(31)SB.