Specifications

IP Switching Commands
show pxf cpu buffers
ISW-272
Cisco IOS IP Switching Command Reference
May 2008
show pxf cpu buffers
To display packet buffer memory for temporary packet storage in the Cisco Internetwork Performance
Monitor (IPM) of the Parallel eXpress Forwarding (PXF), use the show pxf cpu buffers command in
privileged EXEC mode.
show pxf cpu buffers
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command provides information about the number of handles that are used and available. Handles
are outstanding packets in the virtual time management system (VTMS).
Examples The following example shows the number of handles that are used and available:
Router# show pxf cpu buffers
Cobalt2 ttc running.
Calculations could be off by (+/-) cache sizes.
cache size
small 512
large 128
pool # handles available
--------------------------------
small 524288 523808
large 32768 32624
Table 46 describes the fields shown in the display.
Release Modification
12.2S This command was introduced on the Cisco 10000 series router.
12.2(31)SB This command was integrated into Cisco IOS Release 12.2(31)SB.
Ta b l e 46 show pxf cpu buffers Field Descriptions
Field Description
pool Identifies the buffer pool.
# handles The number of handles that are currently used.
available The number of handles that are currently available.