Specifications

IP Switching Commands
show pxf cpu atom
ISW-270
Cisco IOS IP Switching Command Reference
May 2008
show pxf cpu atom
To display Parallel eXpress Forwarding (PXF) CPU Any Transport over MPLS (AToM) forwarding
information for an interface or Virtually Cool Common Index (VCCI), use the show pxf cpu atom
command in privileged EXEC mode.
show pxf cpu atom [interface-name | vcci]
Syntax Description
Command Modes Privileged EXEC
Command History
Examples The following example shows AToM forwarding information for Gigabit Ethernet interface 6/0/0:
Router#: show pxf cpu atom gigabitethernet 6/0/0
Imposition Information for VCCI 0x9E2:
Output VCCI: 0x0
Mac rewrite index: 0x0 extension: 0x0
Ingress Flags: 0x0
PTI Action Table: 0x0
Related Commands
interface-name (Optional) Name of the interface.
vcci (Optional) VCCI entry identifier.
Release Modification
12.2(31)SB This command was introduced on the Cisco 10000 series router.
Command Description
show mpls l2transport
vc
Displays information about AToM VCs that are enabled to route Layer 2 packets
on a router.
show pxf cpu mpls Displays PXF MPLS FIB entry information.
show pxf cpu
subblocks
Displays subblocks information that includes column 0 of AToM.