Specifications

IP Switching Commands
show pxf accounting
ISW-261
Cisco IOS IP Switching Command Reference
May 2008
show pxf accounting
To show Parallel eXpress Forwarding (PXF) switching statistics for individual interfaces, use the
show
pxf accounting command in user EXEC or privileged EXEC mode.
show pxf accounting interface [slot/port]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines You can display information about the interface types shown in Table 44 using the show pxf accounting
command:
interface Specifies the type of interface to display.
slot (Optional) Backplane slot number. On the Cisco 7200 VXR series routers,
the value can be from 0 to 6.
port (Optional) Port number of the interface. On the Cisco 7200 VXR series
routers, the value can be from 0 to 5.
Release Modification
12.1(1)E This command was introduced.
12.1(5)T This command was integrated into Cisco IOS Release 12.1(5)T.’
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Ta b l e 44 show pxf accounting Interface Types
Keyword Interface Type
atm ATM interface
ethernet Ethernet interface
fastethernet Fast Ethernet interface
hssi High Speed Serial interface
null Null interface
pos Packet-over-SONET interface
serial Synchronous serial interface
summary PXF summary statistics