Specifications

IP Switching Commands
show mls ip statistics
ISW-252
Cisco IOS IP Switching Command Reference
May 2008
show mls ip statistics
To display the statistical information for the NetFlow IP entries, use the show mls ip statistics command
in the user EXEC or privileged EXEC mode.
show mls ip statistics [count [module number] | detail [module number] | module number]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples This example shows how to display statistical information for the NetFlow IP entries:
Router> show mls ip statistics
Displaying Netflow entries in Supervisor Earl
DstIP SrcIP Prot:SrcPort:DstPort Src i/f:AdjPtr
--------------------------------------------------------------------
Pkts Bytes Age LastSeen Attributes
---------------------------------------------------
Router>
This example shows how to display detailed statistical information for the NetFlow IP entries:
Router> show mls ip statistics detail
Displaying Netflow entries in Supervisor Earl
DstIP SrcIP Prot:SrcPort:DstPort Src i/f:AdjPtr
--------------------------------------------------------------------
Pkts Bytes Age LastSeen Attributes
---------------------------------------------------
QoS Police Count Threshold Leak Drop Bucket Use-Tbl Use-Enable
-----------+------------+---------+-----------+----+-------+-------+----------+
Router>
count (Optional) Displays the total number of NetFlow entries.
module number (Optional) Displays the entries that are downloaded on the specified module.
detail (Optional) Specifies a detailed per-flow output.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(17a)SX This command is supported on releases prior to Release 12.2(17a)SX only.
12.2(17b)SXA On Cisco 7600 series routers that are configured with a Supervisor Engine 720, this
command is replaced by the show mls netflow ip command.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to Release
12.2(17d)SXB.