Specifications

IP Switching Commands
show mls cef vrf
ISW-243
Cisco IOS IP Switching Command Reference
May 2008
show mls cef vrf
To display information about the Virtual Private Network (VPN) routing and forwarding instance (VRF)
Cisco Express Forwarding table for a specific VRF name, use the show mls cef vrf command in user
EXEC or privileged EXEC mode.
show mls cef vrf instance-name [prefix] [detail] [lookup ip-address] [module num]
[rpf
[ip-address]]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command is not supported on Cisco 7600 series routers that are configured with a Supervisor
Engine
2.
The show mls cef ip command displays the CEF entries in the default VRF. To display specific
(non-default) VRF entries, use the show mls cef [ip] vrf vrf-name command.
Examples This example shows how to display information about the VPN routing and forwarding instance CEF
table for a specific VRF name:
Router# show mls cef vrf vpn-1
Codes: decap - Decapsulation, + - Push Label
Index Prefix Adjacency
64 0.0.0.0/32 receive
65 255.255.255.255/32 receive
280 10.50.27.1/32 receive
281 10.50.27.0/32 receive
282 10.50.27.255/32 receive
298 10.1.1.1/32 receive
instance-name VPN routing/forwarding instance name; valid values are from 0 to 4095.
prefix (Optional) Prefix of the entry to display.
detail (Optional) Displays the hardware-entry details.
lookup ip-address (Optional) Displays the longest prefix-match lookup entry for the specified
address.
module num (Optional) Displays the entries for a specific module.
rpf ip-address (Optional) Displays the unicast Reverse Path Forwarding (uRPF) check
information for the (optional) specified IP address.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.