Specifications

IP Switching Commands
show mls cef statistics
ISW-240
Cisco IOS IP Switching Command Reference
May 2008
show mls cef statistics
To display the number of switched packets and bytes, use the show mls cef statistics command in user
EXEC or privileged EXEC mode.
show mls cef statistics [module number]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines In Cisco 7600 series routers that are configured with a Supervisor Engine 2 with a Policy Feature Card
(PFC) and a Multilayer Switching Feature Card
2 (MSFC2), Multilayer Switching (MLS)-hardware
Layer
3 switching provides IP unicast and IP multicast Layer 3 switching for a Supervisor Engine 2, a
PFC2, an MSFC2, and fabric-enabled switching modules that have a Distributed Forwarding Card
(DFC).
Examples This example shows how to display the MLS-hardware Layer 3-switching statistics:
Router# show mls cef statistics
Total CEF switched packets: 0000000000000000
Total CEF switched bytes: 0000000000000000
Router#
module number (Optional) Displays the information for a specific module.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Release
12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.