Specifications

IP Switching Commands
show mls cef mpls
ISW-237
Cisco IOS IP Switching Command Reference
May 2008
show mls cef mpls
To display the Multiprotocol Label Switching (MPLS) entries in the Multilayer Switching (MLS)-hardware
Layer
3 switching table, use the show mls cef mpls command in user EXEC or privileged EXEC mode.
show mls cef mpls [detail] [internal] [labels value] [module number] [vpn instance]
[vrf
instance]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples This examples shows how to display MPLS entries:
Router# show mls cef mpls
Codes: + - Push label, - - Pop Label * - Swap Label
Index Local Label Out i/f
Label Op
detail (Optional) Displays hardware-entry details.
internal (Optional) Displays internal Cisco Express Forwarding entries.
labels value (Optional) Displays the entries for a specific label; valid values are from 0
to 1048575.
module number (Optional) Displays the entries for a specific module.
vpn instance (Optional) Displays the Virtual Private Network (VPN) ID MPLS table
entries for a specific VPN instance; valid values are from 0 to 4095.
vrf instance (Optional) Displays the MPLS Cisco Express Forwarding table entries for
a specific VPN routing and forwarding (VRF) instance.
12.2(17a)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.