Specifications

IP Switching Commands
show mls cef maximum-routes
ISW-236
Cisco IOS IP Switching Command Reference
May 2008
This example shows the display if you entered the mls cef maximum-routes command and did not save
the change:
Router# show mls cef maximum-routes
FIB TCAM maximum routes :
=======================
Current :-
-------
IPv4 - 1k (default)
MPLS - 239k
IPv6 + IP Multicast - 8k (default)
User configured :-
---------------
IPv4 + MPLS - 192k (default)
IPv6 + IP multicast - 32k (default)
Upon reboot :-
-----------
IPv4 - 1k (default)
MPLS - 239k
IPv6 + IP multicast - 8k (default)
This example shows the output if you have made a configuration change and saved the change (copy
system:running-config nvram: startup-config command):
Router# show mls cef maximum-routes
FIB TCAM maximum routes :
=======================
Current :-
-------
IPv4 - 1k (default)
MPLS - 239k
IPv6 + IP Multicast - 8k (default)
User configured :-
---------------
IPv4 + MPLS - 192k (default)
IPv6 + IP multicast - 32k (default)
Related Commands Command Description
copy
system:running-config
nvram: startup-config
Saves the configuration to NVRAM.
mls cef
maximum-routes
Limits the maximum number of the routes that can be programmed in the
hardware allowed per protocol.