Specifications

IP Switching Commands
show mls cef mac
ISW-234
Cisco IOS IP Switching Command Reference
May 2008
show mls cef mac
To display the MLS-hardware Layer 3-switching MAC-address information for the MSFC, use the show
mls cef mac command in user EXEC or privileged EXEC mode.
show mls cef mac [module num]
Syntax Description
Defaults This command has no default settings.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command is supported on Cisco 7600 series routers that are configured with a Supervisor Engine 2
only.
In Cisco 7600 series routers that are configured with a Supervisor Engine 2 with a PFC and an MSFC2,
MLS-hardware Layer
3 switching provides IP unicast and IP multicast Layer 3 switching for a
Supervisor Engine
2, a PFC2, an MSFC2, and fabric-enabled switching modules that have a DFC.
Examples This example shows how to display the MLS-hardware Layer 3-switching MAC-address information for
the MSFC:
Router# show mls cef mac
Router MAC address:00d0.061d.200a
Related Commands
module num (Optional) Displays the entries for a specific module.
Release Modification
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
Command Description
show mls cef Displays the MLS-hardware Layer 3-switching table entries.
show mls cef summary Displays the number of routes in the MLS-hardware Layer 3-switching
table for all the protocols.