Specifications

IP Switching Commands
show mls cef logging
ISW-232
Cisco IOS IP Switching Command Reference
May 2008
show mls cef logging
To display the contents of the TCAM-inconsistency buffer, use the show mls cef logging command in
user EXEC or privileged EXEC mode.
show mls cef logging [module number]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command is supported on Cisco 7600 series routers that are configured with a Supervisor Engine 2
only.
In Cisco 7600 series routers that are configured with a Supervisor Engine 2 with a PFC and an MSFC2,
MLS-hardware Layer
3 switching provides IP unicast and IP multicast Layer 3 switching for a
Supervisor Engine
2, a PFC2, an MSFC2, and fabric-enabled switching modules that have a DFC.
The TCAM-inconsistency buffer records any inconsistency that is found in the TCAM.
MLS-hardware Layer 3 switching applies to IP traffic only.
Examples This example shows how to display the contents of the TCAM inconsistency buffer:
Router# show mls cef logging
PFIB_ERR:TCAM_SHADOW_CONSISTENCY_ERR:value : Index: 100
Expected: 0 -0 -0
Hardware: 5 -1020304 -0
PFIB_ERR:TCAM_SHADOW_CONSISTENCY_ERR:Mask : Index: 3
Expected: 4 -0 -0
Hardware: 6 -FFF00000-0
module number (Optional) Displays the entries for a specific module.
Release Modification
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.