Specifications

IP Switching Commands
show mls cef ipx
ISW-231
Cisco IOS IP Switching Command Reference
May 2008
show mls cef ipx
To display Internetwork Packet Exchange (IPX) entries in the Multilayer Switching (MLS)-hardware
Layer
3 switching table, use the show mls cef ipx command in user EXEC or privileged EXEC mode.
show mls cef ipx [prefix [mask | module number] | module number]
Syntax Description
Defaults This command has no default settings.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command is supported on Cisco 7600 series routers that are configured with a Supervisor Engine 2
only.
Information in the output of the show mls cef ipx command is also displayed in the show mls ipx
command.
Examples This example shows how to display the IPX entries in the MLS-hardware Layer 3-switching table:
Router# show mls cef ipx
Router#
Index Prefix Mask Adjacency
.
Related Commands
prefix (Optional) Entry prefix in the format A.B.C.D.
mask (Optional) Entry prefix mask in the format A.B.C.D.
module number (Optional) Displays the entries for a specific module.
Release Modification
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Cisco
IOS Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
Command Description
show mls ipx Displays IPX-related MLS-hardware Layer 3 switching table entries.