Specifications

IP Switching Commands
show mls cef ip
ISW-220
Cisco IOS IP Switching Command Reference
May 2008
89 10.2.2.7/32 Gi5/2, 0000.c005.0207
90 10.1.1.5/32 Gi5/1, 0000.0101.0105
3200 224.0.0.0/8 punt
3201 10.1.1.0/24 punt
3202 10.2.2.0/24 punt
134400 172,20.0.0/8 punt
134432 0.0.0.0/0 drop
524256 0.0.0.0/0 drop
Router#
Table 42 describes the fields shown in the examples.
This example shows how to display the detailed MLS-hardware Layer 3-switching table entries:
Router# show mls cef ip 127.0.0.1 detail
Codes: M - mask entry, V - value entry, A - adjacency index, P - priority bit
D - full don't switch, m - load balancing modnumber, B - BGP Bucket sel
V0 - Vlan 0,C0 - don't comp bit 0,V1 - Vlan 1,C1 - don't comp bit 1
RVTEN - RPF Vlan table enable, RVTSEL - RPF Vlan table select
Format: IPV4_DA - (8 | xtag vpn pi cr recirc tos prefix)
Format: IPV4_SA - (9 | xtag vpn pi cr recirc prefix)
M(194 ): E | 1 FFF 0 0 0 0 255.255.255.255
V(194 ): 8 | 1 0 0 0 0 0 127.0.0.1 (A:133120 ,P:1,D:0,m:0 ,B:0)
Router#
This example shows how to display all the prefixes that are configured for the statistic collection:
Router# show mls cef ip accounting per-prefix
VRF Prefix/Mask Packets Bytes
A - Active, I - Inactive
Router#
Related Commands
Ta b l e 42 show mls cef ip Command Output Fields
Field Description
Index MLS-hardware Layer 3-switching table entry index; the maximum is
256,000
entries.
Prefix Entry prefix address/mask.
Adjacency Adjacency information.
Command Description
show mls cef Displays the MLS-hardware Layer 3-switching table entries.