Specifications

IP Switching Commands
show mls cef inconsistency
ISW-215
Cisco IOS IP Switching Command Reference
May 2008
show mls cef inconsistency
To display consistency-checker information, use the show mls cef inconsistency command in user
EXEC or privileged EXEC mode.
show mls cef inconsistency [module num | now | records] [detail] [module num]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command is not supported on Cisco 7600 series routers that are configured with a Supervisor
Engine
2.
If you enter the show mls cef inconsistency command with no arguments, this information is displayed:
• Consistency check count
• Ternary Content Addressable Memory (TCAM)-consistency check errors
• Synchronous static random access memory (SSRAM)-consistency check errors
Examples This example shows how to display information about the consistency checker:
Router# show mls cef inconsistency
Consistency Check Count : 81
TCAM Consistency Check Errors : 0
SSRAM Consistency Check Errors : 0
Router#
module num (Optional) Displays inconsistency information for the specified module.
now (Optional) Runs a consistency check and displays any issues.
records (Optional) Displays the inconsistency records.
detail (Optional) Displays hardware-entry details.
module num (Optional) Displays the adjacency-node information for a specific module.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB Support for this command was implemented on the Supervisor Engine 2 for
Cisco IOS Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.