Specifications

IP Switching Commands
show mls cef exact-route
ISW-209
Cisco IOS IP Switching Command Reference
May 2008
show mls cef exact-route
To display information about the hardware load sharing, use the show mls cef exact-route command in
user EXEC or privileged EXEC mode.
show mls cef exact-route {vrf instance-name src-ip | src-ip} {dest-ip | src-l4port} [dest-l4port |
module
num]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines The vrf instance-name keyword and argument are not supported on Cisco 7600 series routers that are
configured with a Supervisor Engine
2.
Examples This example shows how to display the hardware load-sharing information:
Router# show mls cef exact-route 172.20.52.16 172.20.52.31
Interface: Gi2/1, Next Hop: 255.255.255.255, Vlan: 4073, Destination Mac: 00d0.061d.200a
Router#
Related Commands
vrf
instance-name
Displays the numeric Virtual Private Network (VPN) routing and
forwarding (VRF) ID for the specified VRF instance name.
src-ip Source IP address.
dest-ip Destination IP address.
src-l4port Layer 4-source port number; valid values are from 0 to 65535.
dest-l4port (Optional) Layer 4-destination port number; valid values are from 0 to
65535.
module num (Optional) Module number.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(17a)SX This command was changed to include the vrf instance-name keyword and
argument.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
Command Description
show ip cef exact-route Displays the exact route for a source-destination IP address pair.