Specifications

IP Switching Commands
show mls cef adjacency
ISW-207
Cisco IOS IP Switching Command Reference
May 2008
Index: 133133 smac: 000a.421f.3000, dmac: 0050.2a8d.700a
mtu: 1518, vlan: 1, dindex: 0x0, l3rw_vld: 1
packets: 0, bytes: 0
Index: 133134 smac: 000a.421f.3000, dmac: 0000.7201.0001
mtu: 1518, vlan: 72, dindex: 0x0, l3rw_vld: 1
packets: 0, bytes: 0
Index: 133135 smac: 000a.421f.3000, dmac: 0000.7301.0001
mtu: 1518, vlan: 73, dindex: 0x0, l3rw_vld: 1
packets: 0, bytes: 0
<Output is truncated>
This example shows how to display information about the MPLS adjacency:
Router# show mls cef adjacency mpls detail
Index: 32768 smac: 0000.0000.0000, dmac: 0000.0000.0000
mtu: 1514, vlan: 0, dindex: 0x7FFA, l3rw_vld: 1
format: MPLS, flags: 0x1000408600
label0: 0, exp: 0, ovr: 0
label1: 0, exp: 0, ovr: 0
label2: 0, exp: 0, ovr: 0
op: POP
packets: 0, bytes: 0
Router#
This example shows how to display information about the multicast adjacency:
Router# show mls cef adjacency multicast detail
Index: 22 smac: 0000.0000.0000, dmac: 0000.0000.0000
mtu: 0, vlan: 0, dindex: 0x0, l3rw_vld: 0
format: MULTICAST, flags: 0x800
met2: 0, met3: 0
packets: 2232, bytes: 180684
Router#
This example shows how to display information about the NAT adjacency:
Router# show mls cef adjacency nat detail
Index: 200 mtu: 1522, vlan: 1063, dindex: 0x7FFA, l3rw_vld: 1
format: NAT, flags: 0x8600
ip_sa: 10.2.2.2, src_port: 100
ip_da: 10.3.3.3, dst_port: 300
delta_seq: 0, delta_ack: 0
packets: 0, bytes: 0
Router#
This example shows how to display information about the special adjacency:
Router# show mls cef adjacency special
Index: 0 smac: 0000.0000.0000, dmac: 0000.0000.0000
mtu: 9234, vlan: 0, dindex: 0x0, l3rw_vld: 0
format: MULTICAST, flags: 0x800 (mcast_fib_fail)
met2: 0, met3: 0
packets: 0, bytes: 0
Index: 1 smac: 0000.0000.0000, dmac: 0000.0000.0000
mtu: 9234, vlan: 0, dindex: 0x0, l3rw_vld: 0
format: MULTICAST, flags: 0x800 (mcast_fib_rf_cr)
met2: 0, met3: 0
packets: 0, bytes: 0
<Output is truncated>