Specifications

IP Switching Commands
show mls cef adjacency
ISW-204
Cisco IOS IP Switching Command Reference
May 2008
show mls cef adjacency
To display information about the Multilayer Switching (MLS)-hardware Layer 3-switching adjacency
node, use the show mls cef adjacency command in user EXEC or privileged EXEC mode.
show mls cef adjacency [all | decap-tunnel | {encap-tunnel ip-src-addr} | {entry index [to
end-range]} | {flags lower-flag upper-flag} | mac-address number | mac-rewrite | macv4 |
{mpls [label]} | multicast | nat | recirculation | special | tcp | usage] [detail] [module number]
Syntax Description
Command Default This command has no default settings.
all (Optional) Displays all application-allocated entries.
decap-tunnel (Optional) Displays the decapsulated tunneled-packet information.
encap-tunnel
ip-src-addr
(Optional) Displays the encapsulated tunnel-adjacency entry that matches the
specified address.
entry index (Optional) Displays the adjacency-entry information for the specified
index; valid values are from 0 to 1048575.
to end-range (Optional) Specifies the index range to display adjacency-entry
information; valid values are from 0 to 1048575.
flags (Optional) Displays information about the specified bit flags. See the
“Usage Guidelines” section for additional information.
lower-flag Lower 32-bits flag values to display; valid values are 0 to FFFFFFFF.
upper-flag Upper 32-bits flag values to display; valid values are 0 to FFFFFFFF.
mac-address number (Optional) Displays information about the matched MAC-address
adjacency for the specified 48-bit hardware address in the H.H.H format.
mac-rewrite (Optional) Displays information about the MAC-rewrite adjacency.
macv4 (Optional) Displays information about the MACv4 adjacency.
mpls (Optional) Displays information about the Multiprotocol Label Switching
(MPLS) adjacency.
label (Optional) MPLS label to display adjacency-entry information; valid values
are from 0 to 1048575.
multicast (Optional) Displays information about the multicast adjacency.
nat (Optional) Displays information about the Network Address Translation
(NAT) adjacency.
recirculation (Optional) Displays information about the recirculated-adjacency entry.
special (Optional) Displays information about the special adjacencies.
tcp (Optional) Displays information about the TCP-application adjacency.
usage (Optional) Displays information about the adjacency usage.
detail (Optional) Displays hardware-entry details.
module number (Optional) Displays information about the adjacency node for a specific
module.