Specifications

IP Switching Commands
show ip mds stats
ISW-193
Cisco IOS IP Switching Command Reference
May 2008
show ip mds stats
To display switching statistics or line card statistics for multicast distributed switching (MDS), use the
show ip mds stats command in user EXEC or privileged EXEC mode.
show ip mds stats [switching | linecard]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines Use this command on the Route Processor (RP).
Examples The following is sample output from the show ip mds stats command used with the switching keyword:
Router# show ip mds stats switching
Slot Total Switched Drops RPF Punts Failures
(switch/clone)
1 0 0 0 0 4 0/0
3 20260925 18014717 253 93 2247454 1/0
Table 38 describes the significant fields in the display.
switching (Optional) Displays switching statistics.
linecard (Optional) Displays line card statistics.
Release Modification
11.2(11)GS This command was introduced.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Ta b l e 38 show ip mds stats switching Field Descriptions
Field Description
Slot Slot number for the line card.
Total Total number of packets received.
Switched Total number of packets switched.
Drops Total number of packets dropped.
RPF Total number of packets that failed reverse path forwarding (RPF) lookup.