Specifications

IP Switching Commands
show ip mds interface
ISW-191
Cisco IOS IP Switching Command Reference
May 2008
show ip mds interface
To display Multicast Distributed Switching (MDS) information for all the interfaces on the line card, use
the show ip mds interface command in user EXEC or privileged EXEC mode.
show ip mds interface [vrf vrf-name]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the show ip mds interface command:
Router# show ip mds interface
Interface SW-Index HW-Index HW IDB FS Vector VRF
Ethernet1/0/0 2 1 0x60C2DB40 0x602FB7A4 default
Ethernet1/0/1 3 2 0x60C32280 0x603D52B8 default
Ethernet1/0/2 4 3 0x60C35E40 0x602FB7A4 default
Ethernet1/0/3 5 4 0x60C39E60 0x603D52B8 default
Ethernet1/0/4 6 5 0x60C3D780 0x602FB7A4 default
Ethernet1/0/5 7 6 0x60C41140 0x602FB7A4 default
Ethernet1/0/6 8 7 0x60C453A0 0x602FB7A4 default
Ethernet1/0/7 9 8 0x60C48DC0 0x602FB7A4 default
POS2/0/0 10 9 0x0 default
POS3/0/0 11 10 0x0 default
Virtual-Access1 13 11 0x0 default
Loopback0 14 12 0x0 default
Tunnel0 15 23 0x61C2E480 0x603D52B8 vrf1
Tunnel1 16 24 0x61C267E0 0x603D52B8 vrf2
Ethernet1/0/3.1 17 4 0x60C39E60 0x603D52B8 vrf1
Ethernet1/0/3.2 18 4 0x60C39E60 0x603D52B8 vrf2
vrf (Optional) Supports the Multicast Virtual Private Network (VPN)
routing/forwarding instance (VRF).
vrf-name (Optional) Name assigned to the VRF.
Release Modification
11.0 This command was introduced.
11.2(11)GS This command was integrated into Cisco IOS Release 11.2(11)GS.
12.0(23)S The vrf keyword and vrf-name argument were added.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(18)SXE Support for this command was introduced on the Supervisor Engine 720 only.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.