Specifications

IP Switching Commands
show ip cef vrf
ISW-188
Cisco IOS IP Switching Command Reference
May 2008
Usage Guidelines Used with only the vrf-name argument, the show ip cef vrf command shows a shortened display of the
CEF table.
Used with the detail keyword, the show ip cef vrf command shows detailed information for all CEF
table entries.
Examples This example shows the forwarding table associated with the VRF called vrf1:
Router# show ip cef vrf vrf1
Prefix Next Hop Interface
0.0.0.0/32 receive
10.11.0.0/8 10.50.0.1 Ethernet1/3
10.12.0.0/8 10.52.0.2 POS6/0
10.50.0.0/8 attached Ethernet1/3
10.50.0.0/32 receive
10.50.0.1/32 10.50.0.1 Ethernet1/3
10.50.0.2/32 receive
10.50.255.255/32 receive
10.51.0.0/8 10.52.0.2 POS6/0
10.224.0.0/24 receive
10.255.255.255/32 receive
Table 35 describes the fields shown in the example.
Related Commands
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.
Release Modification
Ta b l e 35 show ip cef vrf Field Descriptions
Field Description
Prefix Specifies the network prefix.
Next Hop Specifies the BGP next hop address.
Interface Specifies the VRF interface.
Command Description
show ip route vrf Displays the IP routing table associated with a VRF.
show ip vrf Displays VRF interfaces.