Specifications

IP Switching Commands
show ip cef non-recursive
ISW-170
Cisco IOS IP Switching Command Reference
May 2008
show ip cef non-recursive
To display nonrecursive route entries in the Forwarding Information Base (FIB), use the show ip cef
non-recursive command in user EXEC or privileged EXEC mode.
show ip cef non-recursive [detail | epoch epoch-number | internal | platform | source]
Cisco 10000 Series Routers
show ip cef non-recursive [detail | internal | platform]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines The show ip cef non-recursive detail command shows detailed FIB entry information for all
nonrecursive routes.
detail (Optional) Displays detailed nonrecursive route entry information.
epoch epoch-number (Optional) Displays adjacency type entries filtered by epoch number.
The epoch number range is from 0 to 255.
internal (Optional) Displays data for nonrecursive route entries.
platform (Optional) Displays platform-specific nonrecursive route entries.
source (Optional) Displays source-specific nonrecursive route entry
information.
Release Modification
12.0(22)S This command was introduced.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(14)S This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(25)S The epoch, internal, platform, and source keywords were added, and the
epoch-number argument was added.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB and
implemented on the Cisco 10000 series routers.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(33)SXH This command was integrated into Cisco IOS Release 12.2(33)SXH.