Specifications

IP Switching Commands
show ip cef inconsistency
ISW-168
Cisco IOS IP Switching Command Reference
May 2008
show ip cef inconsistency
To display Cisco Express Forwarding IP prefix inconsistencies, use the show ip cef inconsistency
command in user EXEC or privileged EXEC mode.
show ip cef [vrf vrf-name] inconsistency [records [detail]]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command is available only on routers with line cards.
This command displays recorded IP Cisco Express Forwarding inconsistency records found by the
lc-detect, scan-rp, scan-rib, and scan-lc detection mechanisms.
You can configure the IP Cisco Express Forwarding prefix consistency-detection mechanisms using the
ip cef table consistency-check command.
Examples The following sample output is from the show ip cef inconsistency command:
Router# show ip cef inconsistency
Table consistency checkers (settle time 65s)
lc-detect:running
0/0/0 queries sent/ignored/received
scan-lc:running [100 prefixes checked every 60s]
0/0/0 queries sent/ignored/received
scan-rp:running [100 prefixes checked every 60s]
0/0/0 queries sent/ignored/received
vrf (Optional) A Virtual Private Network (VPN) routing and forwarding (VRF)
instance.
vrf-name (Optional) Name assigned to the VRF.
records (Optional) Displays all recorded inconsistencies.
detail (Optional) Displays detailed information for each Cisco Express Forwarding
table entry.
Release Modification
12.0(15)S This command was introduced.
12.2(2)T This command was integrated into Cisco IOS Release 12.2(2)T.
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.