Specifications

IP Switching Commands
show interfaces switching
ISW-147
Cisco IOS IP Switching Command Reference
May 2008
Auton/SSE 0 0 0 0
.........
........
Protocol IPv6
Switching path Pkts In Chars In Pkts Out Chars Out
Process 0 0 0 0
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol Other
Switching path Pkts In Chars In Pkts Out Chars Out
Process 2 120 3 180
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
NOTE: all counts are cumulative and reset only after a reload.
Interface POS4/0 is disabled
The following shows sample output from the show interfaces switching command for the interface Fast
Ethernet 0/0:
Router> show interfaces FastEthernet 0/0 switching
FastEthernet0/0
Throttle count 0
Drops RP 0 SP 0
SPD Flushes Fast 218 SSE 0
SPD Aggress Fast 0
SPD Priority Inputs 0 Drops 0
Protocol IP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 239 23422 237 23226
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol ARP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 4 240 3 180
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol CDP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 8 2632 15 5477
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
NOTE: all counts are cumulative and reset only after a reload.
Table 20 describes the significant fields shown in the display.