Specifications

IP Switching Commands
show cef timers
ISW-143
Cisco IOS IP Switching Command Reference
May 2008
show cef timers
To display the current state of the timers internal to the CEF process, use the show cef timers command
in user EXEC or privileged EXEC mode.
show cef timers
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the show cef timers command:
Router# show cef timers
CEF background process
Expiration Type
0.208 (parent)
0.208 adjacency update hwidb
0.540 slow resolution
1.208 ARP throttle
CEF FIB scanner process
Expiration Type
44.852 (parent)
44.852 checker scan-rib
Table 18 describes the significant fields shown in the display.
Related Commands
Release Modification
12.3(2)T This command was introduced.
Ta b l e 18 show cef timers Field Descriptions
Field Description
Expiration Seconds in which the timers will expire
Type Identification of the timer
Command Description
show cef interface Displays CEF-related interface information.
show ipv6 cef Displays entries in the IPv6 FIB.