Specifications

IP Switching Commands
show cef events
ISW-119
Cisco IOS IP Switching Command Reference
May 2008
show cef events
To display a list of events internal to the CEF process, use the show cef events command in user EXEC
or privileged EXEC mode.
show cef events
Syntax Description This command has no arguments or keywords.
Command Modes User EXEC
Privileged EXEC
Command History
Examples The following is sample output from the show cef events command:
Router# show cef events
CEF events (14/0 recorded/ignored)
Time Event Details
+00:00:00.000 SubSys ipfib init
+00:00:00.000 SubSys ipfib_ios init
+00:00:00.000 SubSys ipfib_util init
+00:00:00.000 SubSys adj_ios init
+00:00:00.000 SubSys ipfib_les init
+00:00:01.272 Flag FIB enabled set to yes
+00:00:01.272 Flag FIB switching enabled set to yes
+00:00:01.272 GState CEF enabled
+00:00:02.872 Process Background created
+00:00:02.872 Flag FIB running set to yes
+00:00:02.872 Process Background event loop enter
+00:00:02.912 Flag FIB switching running set to yes
+00:00:02.920 Process Scanner created
+00:00:02.920 Process Scanner event loop enter
Release Modification
12.0(23)S This command was introduced.
12.0(24)S This command was integrated into Cisco IOS Release 12.0(24)S.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2SX This command is supported in the Cisco IOS Release 12.2SX train. Support
in a specific 12.2SX release of this train depends on your feature set,
platform, and platform hardware.