Specifications

IP Switching Commands
mls ip cef load-sharing
ISW-96
Cisco IOS IP Switching Command Reference
May 2008
For additional guidelines, refer to the Cisco 7600 Series Router Cisco IOS Software Configuration
Guide.
Examples This example shows how to set load balancing to include Layer 3 and Layer 4 ports with multiple
adjacencies:
Router(config)# mls ip cef load-sharing full
This example shows how to set load balancing to exclude the destination Layer 4 ports and source and
destination IP addresses (Layer 3) from the load-balancing algorithm:
Router(config)# mls ip cef load-sharing full exclude-port destination
This example shows how to set load balancing to exclude the source Layer 4 ports and source and
destination IP addresses (Layer 3) from the load-balancing algorithm:
Router(config)# mls ip cef load-sharing full exclude-port source
This example shows how to return to the default setting:
Router(config)# no mls ip cef load-sharing
Related Commands Command Description
show mls cef ip Displays the IP entries in the MLS-hardware Layer 3-switching table.