Specifications

IP Switching Commands
mls ip
ISW-92
Cisco IOS IP Switching Command Reference
May 2008
mls ip
To enable multilayer switching (MLS) IP for the internal router on the interface, use the mls ip command
in interface configuration mode. To disable MLS IP on the interface use the no form of this command.
mls ip
no mls ip
Syntax Description This command has no arguments or keywords.
Defaults Multicast is disabled.
Command Modes Interface configuration
Command History
Usage Guidelines This command is not supported on Cisco 7600 series routers that are configured with a Supervisor
Engine
720.
Examples This example shows how to enable MLS IP:
Router(config-if)# mls ip
Related Commands
Release Modification
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended
to Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release
12.2(33)SRA.
Command Description
mls rp ip (interface
configuration)
Allows the external systems to enable MLS IP on a specified interface.
show mls ip multicast Displays the MLS IP information.