Datasheet

Cisco Systems, Inc.
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 3 of 19
Table 1 Cisco Voice Interface Card Applications
VIC Type Application
VIC-2FXS Use to connect directly to phones, fax machines, and key systems (generates battery polarity reversal with IOS Plus 12.1.2T and
later and generates Caller ID using IOS Plus 12.1.3T or later).
VIC-2FXO Use to connect to PBX or key system and to provide off-premise connections
VIC-2E/M Use to connect to PBX or key system trunk lines
VIC-2FXO-EU Use to connect to PBX or key system and to provide off-premise connections in Europe
VIC-2FXO-M1 Use to connect to PBX or key system and to provide off-premise connections in the U.S., Canada and other countries. Includes
support for battery polarity reversal detection and Caller ID (requires Cisco IOS Plus 12.1.2T and later and supports Caller ID using
Cisco IOS Plus 12.1.3T or later).
VIC-2FXO-M2 Use to connect to PBX or key system and to provide off-premise connections in Europe. Includes support for battery polarity
reversal detection and Caller ID (requires Cisco IOS Plus 12.1.2T or later for battery reversal and supports Caller ID using Cisco
IOS Plus 12.1.3T or later)
VIC-2FXO-M3 Use to connect to PBX or key system and to provide off-premise connections in Australia
VIC-2BRI-S/T-TE Use to connect to PBX or key system and to provide off-premise connections (ISDN voice BRI)
VIC-2BRI-NT/TE Use to connect as network side to PBX or key system and to provide off-premise connections (ISDN voice BRI)
VIC-2DID Use to provide off–premise direct-inward-dial connection to CO. Serves only incoming calls from the PSTN. Supports caller ID.
VIC-2CAMA Use to connect to CAMA trunk to provide E-911 service (North America only)