Datasheet

Cisco Systems, Inc.
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 15 of 19
VIC-2FXO-M1
Two-port FXO voice/fax interface card with battery reversal detection and caller ID (for US, Canada, Japan and
other countries)
Interface Type Foreign exchange office
Cisco IOS Requirement 12.1.2T or later for Cisco 3600 and 2600
12.2(8)T or later for Cisco 2691 and 3700
Cisco Part Number 800-05298-01
Compliance FCC Class B device, CE
Safety Conformance UL1950
Spare VIC-2FXO-M1=
Signaling Formats Loop start, ground start
Address Signaling Formats In-band DTMF
Out-of-band pulse (10/20 pps)
Tone Disconnect Supervision Call disconnect on progress tone of less than 600 Hz
Battery Polarity Reversal Detection Detection of disconnect supervision and far-end answer supervision via battery polarity reversal
Power Interrupt Disconnect Call disconnect on power interrupt of > 600 msec
Physical Connector RJ-11
Number of Connectors/Ports Two
MTBF 546,560 hours (using Bellcore model)
VIC-2FXO-M2
Two-port FXO voice/fax interface card with battery reversal detection and caller ID support (for Europe)
Interface Type Foreign exchange office
Cisco IOS Requirement 12.1.2T or later for Cisco 3600 and 2600
12.2(8)T or later for Cisco 2691 and 3700
Cisco Part Number 800-05920-01
Compliance CE, CTR-21
Safety Conformance UL1950
Spare VIC-2FXO-M2=
Signaling Formats Loop start
Address Signaling Formats In-band DTMF
Out-of-band pulse (10/20 pps)
Tone Disconnect Supervision Call disconnect on progress tone of less than 600 Hz
Battery Polarity Reversal Detection Detection of disconnect supervision and far-end answer supervision via battery polarity reversal
Power Interrupt Disconnect Call disconnect on power interrupt of > 600 msec
Physical Connector RJ-11
Number of Connectors/Ports Two
MTBF 656, 116 hours (using Bellcore model)