Datasheet

Cisco Systems, Inc.
All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 14 of 19
VIC-2E/M
Two-port E&M voice/fax interface card
Interface Type For PBX trunking
Cisco IOS Requirement 11.3(1)T or later for Cisco 3600
11.3(4)T or later for Cisco 2600
12.2(8)T or later for Cisco 2691 and 3700
Cisco Part Number 800-02497-01
Compliance FCC Class B device, CE
Safety Conformance UL 1950
Spare VIC-2E/M=
Address Signaling Formats In-band DTMF
Out-of-band pulse (10/20 pps)
Signaling Formats Immediate, delay dial, wink start
Signaling Types I, II, III, and V
E-Lead Current Limit 100 mA
M-Lead Sensitivity > 3 mA
Pulse Distortion < 2%
Physical Connector 4 wire/2 wire
Number of Connectors/Ports Two
MTBF 1,943,521 hours
VIC-2FXO-EU
Two-port FXO voice/fax interface card (for Europe)
Interface Type Foreign exchange office
Cisco IOS Requirement 11.3(6)T or later for Cisco 3600 or 12.0(2)T or later for Cisco 3600
11.3(6)T or later for Cisco 2600 or 12.0(2)T or later for Cisco 3600
12.2(8)T or later for Cisco 2691 and 3700
Cisco Part Number 800-03639-01
Compliance CE, CTR-21
Safety Conformance UL1950
Spare VIC-2FXO-EU=
Signaling Formats Loop start
Address Signaling Formats In-band DTMF
Out-of-band pulse (10/20 pps)
Tone Disconnect Supervision Call disconnect on progress tone of less than 600 Hz
Power Interrupt Disconnect Call disconnect on power interrupt of > 600 msec
Physical Connector RJ-11
Number of Connectors/Ports Two
MTBF 1,010,264 hours