User guide

DescriptionField
Use this field to configure the handset lamp illumination policy.
Choose one of the following options:
• Use System Policy (The directory number refers to the service
parameter “Message Waiting Lamp Policy” setting.)
• Light and Prompt
• Prompt Only
• Light Only
• None
Setting applies only to the current device unless you check the
Update Shared Device Settings check box and click the Propagate
Selected button. (The check box displays only if other devices share
this directory number.)
Visual Message Waiting Indicator
Policy
Use this field to configure an audible message waiting indicator
policy. Choose one of the following options:
• Off
• On—When you select this option, you will receive a stutter
dial tone when you take the handset off hook.
• Default—When you select this option, the phone uses the
default that was set at the system level.
Audible Message Waiting Indicator
Policy
This field determines the type of notification an incoming call sends
to members of a call pickup group. If the called phone does not
answer, the phones in the call pickup group that are idle will either
hear a short ring (ring once) or hear nothing (disabled).
• Use System Default—The value of this field gets determined
by the setting of the Cisco CallManager service parameter
Call Pickup Group Audio Alert Setting of Idle Station.
• Disable—No alert is sent to members of the call pickup group.
• Ring Once—A short ring is sent to members of the call pickup
group.
Call Pickup Group Audio Alert Setting
(Phone Idle)
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 61
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL