User guide

DescriptionField
Enter description for the line template. The description can include
up to 50 characters in any language, but it cannot include
double-quotes ("), percentage sign (%), ampersand ('), or angle
brackets (<>).
Description
This name represents the name that displays during an alert to a
shared directory number. For non-shared directory numbers, during
alerts, the system uses the name that is entered in the Display field.
Alerting Name
This field provides the same information as the Alerting Name field,
but you must limit input to ASCII characters. Devices that do not
support Unicode (internationalized) characters display the content
of the Alerting Name ASCII field.
Alerting Name ASCII
Checking this check box allows calls to this DN to be forwarded
(if forwarding is configured). If check box is not checked, Cisco
Unified Communications Manager ignores the DN.
Active
Directory Number Settings
Choose this parameter to make the pilot number the same as the
directory number for this line. This action proves useful if you do
not have a voice-messaging server that is configured for this phone.
Voice Mail Profile
Choose partitions that are searched for numbers that are called from
this directory number.
Changes cause an update of Pickup Group Names that are
listed in the Call Pickup Group field. The setting applies
to all devices that are using this directory number.
Note
Calling Search Space
Used with the Presence feature, the directory number serves as the
presence entity; that is, watchers request the status of the directory
number, so the real-time status of the directory number displays on
the device.
If you want the phone to receive the status of the presence entity,
make sure that the Presence group of the watcher is allowed to view
the status of the Presence group that is applied to the directory
number, as indicated in the Presence Group Configuration
window.
For information on the Presence feature, refer to the Cisco Unified
Communications Manager Features and Services Guide.
Presence Group
Choose the music on hold audio source to be played when the user
presses HOLD to place a call on hold.
User Hold MOH Audio Source
Choose the music on hold audio source to be played when the system
places a call on hold while the user transfers a call or initiates a
conference or call park.
Network Hold MOH Audio Source
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 59
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL