User guide

DescriptionField
Enter the password for a secure shell user. If the phone you are
configuring does not support secure shell access, this field does not
display. Contact TAC for further assistance.
Secure Shell Password
Product-Specific Configuration
The device manufacturer specifies the model-specific fields under
product-specific configuration. Because they are dynamically configured,
they can change without notice.
To view field descriptions and help for product-specific configuration
items, click the “?” information icon to the right of the Product Specific
Configuration heading to display help in a popup dialog box.
If you need more information, refer to the documentation for the specific
device that you are configuring or contact the manufacturer.
Model-specific configuration fields
defined by the device
manufacturers
BAT template phone line field descriptions
The following table provides descriptions of all possible fields that display when you add or update a line in
the BAT templates.
• BAT phone template
• Gateway template
• UDP template
• Remote destination template
Some device types do not require all the phone settings. Only some fields show the values that were configured
in Cisco Unified Communications Manager Administration. Field names that have an asterisk in the BAT
user interface require an entry. Treat fields that do not have an asterisk as optional.
Table 2: Field descriptions for adding a line to a BAT template
DescriptionField
Directory Number Information
Enter a unique name for the line template.
Be aware that this field is available only when you are adding a line
and not when you are updating an existing line.
Line Template Name
Choose a route partition to which the directory number belongs.
The directory number can appear in more than one
partition.
Note
Route Partition
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
58 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL