User guide

DescriptionField
Check the check box to deliver the display information element (IE) in
SETUP and CONNECT messages for the calling and called party name
delivery service.
Display IE Delivery
Check this check box to include the Redirecting Number IE in the
outgoing SETUP message from the Cisco Unified Communications
Manager to indicate the first redirecting number and the redirecting
reason of the call when the call is forwarded.
Uncheck the check box to exclude the first redirecting number and the
redirecting reason from the outgoing SETUP message.
Use Redirecting Number IE for voice-messaging integration only. If
your configured voice-messaging system supports Redirecting Number
IE, check the check box.
Redirecting Number IE
Delivery—Outbound
Use Redirecting Number IE when you are integrating a voice-messaging
system that supports Redirecting Number IE.
Check this check box to accept the Redirecting Number IE in the
incoming SETUP message to the Cisco Unified Communications
Manager.
Uncheck the check box to exclude the Redirecting Number IE in the
incoming SETUP message to the Cisco Unified Communications
Manager.
Redirecting Number IE
delivery—Inbound
Gatekeeper Information
Choose the gatekeeper for the gatekeeper-controlled H.323 device from
the drop-down list box.
If you do not choose the device, the system disables the E.164,
Technology Prefix, and Zone fields.
Note
You cannot change the device to a gatekeeper-controlled phone
if more than one directory number is configured for the device.
Note
Gatekeeper Name
Choose the E.164 address that is registered with the gatekeeper.
Ensure the H.323 client is configured as a gatekeeper-controlled
device.
Note
You must enter a value in this field for a gatekeeper-controlled
H.323 client. You can enter only numbers (0-9) and special
characters # and * in this field.
Note
E.164
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
56 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL